Nano Decking Antique Pine 002

Previous 2 / 4 Next

Nano Decking Antique Pine 002 Exterior Oil

BonshureAntique Pine is durable woods stain with added UV protection recommended for use on all exterior woodwork likely to be directly or indirectly exposed to weather and strong sunlight. Use on heavily exposed exterior wood such as cladding, window frames, doors and fences. bonshure Antique Pine penetrates the wood cells and contains special agents to prevent dry rot, surface insect and fungal attack and has exceptional protection against the harsh UV rays of the sun.

Weathering Tested by TUV Singapore
ISO 16474-2 : 2013

ISO 105-A02 : 1993 (2014)

Special Features
  • Low odor, resists cracking, peeling, blistering.
  • UV resistant to prevent color fade
  • Protection against wood boring insects attack and fungi.
  • Suitable for new bare wood or as remedial measures
  • Reduce check and decay.
  • Scuffing resistance
  • Tough Weather Protection
  • Extending wood life
  • Preserving wood natural looks
  • Multiple choice of color
  • Odor after Drying None

We recommend a trial application before you start. The final color will depend on the original wood and the condition of the timber and the number of coats applied. Stir thoroughly before use to prevent settling and drying of protective agents. Ensure the surface isclean and dry.

Bare wood: brush and remove all traces and dust. For greater protection timber may be treated with an exterior wood preserver must be applying bonshure transparent colorant and finishes with bonshure Antique Pine.

Previously stained wood: brush the timber to remove any flaking pieces, sand to a smooth surface and remove all dust.
Previously painted or varnished surfaces: Strip bare and treat as new wood.

Recommended Treatment Schedule
  • New Work : 2-3 Coats required (bonshure transparent colorant base coat and bonshure 002 Antique Pine top coat)
  • Maintenance:1-2 coats, depending on the amount of weathering that has occured.
  • Coverage for planned softwood: 8-12m²/litre
  • Coverage for planned Hardwood:12-15m²/litre

Do not apply bonshure Antique Pine in wet conditions or if rain, frost or snow as product is unlikely to dry.
  • Decking areas should be completely dry before application
  • Stir before and during application
  • Apply bonshure extra provides to the decking with a good quality    roller or bristle brush
  • One coat of bonshure Antique Pine can appear nature wood grain sufficient but this may vary depending on the type of decking timber and its absorbency.(If need extra tough weather protection put 0.5 Litre 004 Oak color into boshure 002 Antique Pine )
Drying Times
  • Bonshure Transparent Colorant
    - 3-4 hours between coats bonshure transparent colorant
    - 3-4 hours coats bonshure Antique Pine
    - Touch dry 2 hours 30 minutes to 3 hours.
  • Bonshure Antique Pine
    - 12-18 hours between coats bonshure Antique Pine
    - Touch dry 2 hours 30 minutes to 3 hours
Decking will be ready for general use after 24 hours. Drying times can vary depending on temperature, humidity and porosity of the timber.

  • BonshureAntique Pine 5Litre
  • Bonshuretransparant colorant 5 Litre
  • The colour above will vary depending on wood species and method of application.
Please leave your enquiry here, we will reply as soon as possible.
Company Name  
Product Interested  
Contact No.*  
*only support gif, jpeg, jpg, png, pdf

Switch to Mobile Version
Subscribe Newsletter