Bonshure Top & Primer E-3 Nova
| Previous | 3 / 5 | Next |
Bonshure Waterborne Acrylic Primer
Acrylic Top & Primer
Product Introduction
Bonshure top & primer e-3 is an economical product suitable for timber flooring & wood floor.
Technical Data
Acrylic Top & Primer
Product Introduction
Bonshure top & primer e-3 is an economical product suitable for timber flooring & wood floor.
Features
- Without the stink
- Easy to apply and clear
- High resistance wear.
- No bubbling , beautiful leveling.
- Fast drying
- Excellent durability
- Non yellowing
Preparation
When you using the bonshure acrylic top & primer you must measured floor surface must be cleaned, dry with dust, dirt, wax and grease removed. Before using you must measure wood floors not be apply any other primer . Do not thin the product. Shake well before use.
Application
After apply bonshure acrylic top & primer 1-2 coat over the surface. 2-3 hours dry time for one coat. we approximately after 6 hours final coat can step on the floor. After four night final coat the floor can be mop with dry cloth on the floor. Coating system reaches final hardness after approx, 1 day
Technical Data
| Solid Content | : | 33% |
| Application Tools | : | Sponge , floor coater, 10 inch formica, roller |
| Intercoat Abrasion | : | Can be recoated without in tercoat abrasion within 24 hours. |
| Suitable Use | : | kitchens, living rooms, active homes with children, office, hospital, shop,etc |
| Dry Time | : |
2-3 hours for one coat(if to encounter air temperature is below 28°c dry time is not stable)
|
| Sand Paper | : | Water sand paper grit 240-320 |
| Shelf Life | : | Shelf life 12 months in opened container. |
| Gloss Level | : | Gloss 20, matt 80%. |
| Coverage | : | 1400-1500 square feet /10kg |
| Storage | : | Store away from direct sunlight |
| Package Size | : | 10kg |
| Technology | : | German |
| Material | : | German |
Our information based on laboratory tests and practical experience and may as such be considered a guide in connection with choice of product and working method. As the users working conditions is beyond our control, we do not assume any responsibility for the result. Our responsibility covers exclusively personal injury or damage to property which actually have been proved subsequent to faults and defects in one of the products manufactured by us.