Bonshure Primer E-4 Nova

Previous 5 / 5 Next

Bonshure Primer E-4 Nova Waterborne


Bonshure Waterborne Acrylic Primer

Classic Timber Floor Finish

Product Introduction

Bonshure primer e-4 is a single component waterborne acrylic base coat for wood floors. It is an economical sealer and basic of high-quality sealer floors is the right sealer.
 
Features
  • Easy to apply and easy abrade
  • Fast drying and no bubbling
  • No lap marks & streaks
  • High build, solid content 
  • Rich wood colouration
  • Can be finished with all waterborne finishes.
  • To mend the parquet hole
  • Suitable for all common wood species expect: merbau, teak, oak, kempas, maple, etc.
Preparation
 
When you using the bonshure primer e-4 you must measured floor must be cleaned, dry with dust, dirt, wax and grease removed. New untreated floor can select wood sand paper grit 24-40 & existing floor should be sanded down to have wood and final sanding with wood sand paper grit 40-120. Do not thin the product. Shake well before use.
 
Application
 
Apply 2-3 coat of bonshure primer e-4, lighty sanding between coats. Firstly use 10 inch formica or 10 inch stainless steel scraper and than apply with bonshure primer e-4 on the parquet surface measure bonshure primer e-4 on parquet have layer is thickness. After 1.5-2.0 hours dry, final sanding with water sand paper grit 240-320 and than use the 10 inch formica or 10 inch stainless steel scraper scrape 1-2 coats. After application, when thoroughly dry apply a bonshure  polyurethane top coat e-9.

Technical Data

Solid Content : 40 %
Viscosity : Approx.14 sec.Fc4.
Application Tools : 10 inch formica, 10 inch stainless steel scraper, floor coater
Coverage : 1600-1800 square feet /10kg
Dry Time : 1.5-2.0  hours for one scrap (if to encounter air temperature is below 28°c dry time is not stable)
Shelf Life : Shelf life 12 months in opened container.
Storage : Store away from direct sunlight
Package Size : 10kg
Technology : German
Material : German

Our information based on laboratory tests and practical experience and may as such be considered a guide in connection with choice of product and working method. As the users working conditions is beyond our control, we do not assume any responsibility for the result. Our responsibility covers exclusively personal injury or damage to property which actually have been proved subsequent to faults and defects in one of the products manufactured by us.


Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*  

Switch to Mobile Version
Subscribe Newsletter